Smoothly and easily remove cartridges from valve bodies under the toughest of circumstances with the ONA puller. Works with Moen 1200 and 1225 single handle cartridges.
Unlike a traditional T-handle, no force is required to remove the cartridge. And the kit can also be used to remove the brass sleeve if the common issue of separation between the cartridge core and brass body arises.
![](https://www.duffcompany.com/dev/wp-content/uploads/199150.jpg)
*Hardened and coated with black oxide
*Made in the USA
To use, simply screw the threaded rod into the cartridge. Insert the tube over the rod and the valve body. Place the crank over the rod and screw it down, seating the crank over the tube to remove the cartridge.
If the brass sleeve remains intact, attach the threaded rod to the expander tube. Place the tapered rod into the tube. Screw the T handle onto the end, slide it into the valve body, and tighten it down to remove the brass body.
The Posi-Temp Puller Add-On can be used to remove a positive cartridge by screwing the threaded rod onto the cartridge and inserting the slotted sleeve over it. Screw the crank down to the tube to remove the cartridge.
![](https://www.duffcompany.com/dev/wp-content/uploads/199150-6.jpg)
For more information or to purchase, contact your Duff Co multi-family or plumbing expert today!